Description
PRODUCT HIGHLIGHTS
- Beta Release This device may not be fully integrated with your hub at the time of purchase. You may need to update the firmware of the device after the purchase.
- Dimming Z-Wave control for 0-10 V LED drivers only (do NOT use with 120 V LED bulbs)
- Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A
- 700 series Z-Wave chip: more range, reliable coverage
- Long Range: if your hub implements Z-Wave Long Range, you’ll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
- Advanced settings to customize minimum or maximum brightness level and more*
- Built-in signal repeater: keep your mesh network stable and your system fast
- SmartStart and S2 authenticated security for a truly protected smart home
- Installs behind the existing wall switch or at the fixture (check your wiring first and always follow the diagrams in the manual)
- Pigtail wires included for quicker set-up
- 5-year extended warranty when registered and tech support forever
NOTE: Z-Wave gateway controller required – sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.
INSTALLATION
Before installing, make sure your fixture uses a 0-10 V dimming driver which doesn’t exceed 4 Amps. Check your wiring first to confirm that you have all the following wires present in your electrical box: both 0-10 V driver connections, power, neutral, and load connection to power the LED driver, as well as a connection to a wall switch.
If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.
Here are some helpful wiring tips:
-
- Make sure the gang box you are about to install the switch has power with a neutral wire available – you will not be able to get the ZEN54 Dimmer to work without a neutral wire.
- Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated – line and load wires can never be swapped as it sometimes happens to the most experienced electricians.
How to include the 0-10 V Dimmer to your smart home network?
1. Put your Z-Wave controller in inclusion/pairing mode (or scan the QR code on the ZEN54 if your hub supports SmartStart)
2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process
3. A new dimmer switch should appear on your hub’s device list
WORKS WITH
- Z-Box Hub (recommended for Zooz products)
- Ezlo Plus (no access to advanced parameters on the Android app)
- Ezlo Secure (no access to advanced parameters on the Android app)
- Home Assistant (Z-Wave JS)
- HomeSeer
- Hubitat (full integration pending)
- SmartThings (custom driver required, get detailed instructions here)
- Vera
NOTE: If you don’t see your Z-Wave controller on the list above, please contact us before you purchase this product.
SPECIFICATIONS
- Z-Wave Frequency: 908.42 MHz (US)
- Power: 120-240 VAC, 50/60 Hz
- Maximum Loads: 4 A, 480W at 120V, 960 W at 240V
- Maximum A rating: 200 mA
- Z-Wave Range: Up to 300 feet line of sight or up to a mile with Long Range enabled)
- Dimensions: 1.5″ tall, 1.4″ wide, 0.7″ deep
- Operating Temperature: 32-104° F (0-40° C)
- Installation: Indoor use only
RESOURCES
Download the Manual for the Zooz 700 Series Z-Wave Plus Long Range 0-10 V Dimmer ZEN54 LR (PDF)